Technical Specification Chart For Steam
A Steam Generator: Factory-assembled unit complete with
Machinery Specification Instant steam with in 4 mint
Bath Generato
Ø Highly durable enclosure with argon gas welded stainless steel boiler with sloped bottom, tested at 5 Kg/ sq.cm
Ø Steam Boiler Insulation in 50mm thick LRB mineral wool Boiler Enclosure Made in 16 Swg MS in exclusively chosen powder coated shades with proper lowers for free air circulation.
Ø Long Life Low Watt Density stainless steel 316 Industrial immersion heaters with faster & more efficient heating systems.
Ø Electronically Micro based controlled automatic water feed with “LOW “or “NO WATER” cut-off systems.
Ø Pressure relief valve set at 3 kg /cm2.
Ø Failsafe Imported thermostatic with high limit control inside the boiler.
All SS / Brass / Chrome fittings.
Ø Exclusive control panel with a higher safety factor, greater reliability and lesser maintenance using colored conductors and silver tipped Siemens contactors for years of trouble free “ ON-OFF” operations
Ø Automatically pressure flushes tank every time unit is shut off (Auto Servicing)
Piping, Fittings, and Valves:
Ø Water Input: Solenoid valve Italy 1/2-inch (8 mm) orifice diameter PVC Body provide shutoff valve and 10-micron sediment filter.
Ø Automatic Pressure Flush: Optional1 inch (25 mm) diameter Piping from hot water supply; ½ hp pump, 5/8” motorizes drain valve with Auto Flush Systems
Ø Drain: ½” inch (12 mm) diameter; connect to sanitary drain piping.
Ø Steam Piping: 1/2 inch (12 mm) diameter outlet
Ø Pressure Relief Valve: 1/2 inch (12 mm)
Ø Steam Line Pipe Double
General Technical recommendations for Steam | Ø Try to install Steam Boiler closer to the Steam Room, which allows you to minimize heat, loses. Ø Use minimum 1’ X 1 ‘glazed or ceramic Tiles for steam room lesser the gaps you reduce heat loses. Ø Keep the doors open after use of Steam to avoid odor smell. Ø Carry out water proofing of flooring in Steam room. Ø Always Provide separate Nahni Trap in Steam Room |